[. . . ] Register your product and get support at www. philips. com/welcome Philips Presenter SNP3000 EN User manual 1 a b c d e f g h 2 3 4 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT Wavelength : 645 - 660nm Maximum Power < 1mW IEC 60825-1:1993 + A1:1997 + A2:2001 EN 60825-1:1994 + A2:2001 + A1:2002 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. [. . . ] 2) When battery is installed: · To switch on the Presenter, push the USB receiver into the Presenter and then remove the USB receiver from it. · To switch off the Presenter, push the USB receiver to the end. 4 Auto-connect 1 Ensure that your notebook is switched on and active. · If the USB receiver is inserted into your Presenter, release the USB receiver from your Presenter (Fig. » If connection is successful, the LED indicator indicates 1 long blink. » If connection fails, the LED indicator indicates 2 long blinks. » The LED blinks upon ever y successful communication between the Presenter and the USB receiver. E Tip · After use, inser t the USB receiver into your Presenter for storage (Fig. [. . . ] Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N. V. [. . . ]